A novel methodology for the rapid identification of the water diffusion coefficients of composite materials

The paper presents a novel methodology for the rapid identification of the water diffusion coefficients of composite materials. The methodology consists in employing a numerical parametric Proper Generalized Decomposition (PGD) method allowing incorporating the diffusion coefficients among the number of degrees of freedom. Compared to classical identification schemes, often based on Finite Element Method (FEM) iterations, the proposed method allows achieving consistent CPU time gain. The method is general and can be applied when diffusion anomalies take place or when diffusion–reaction coupling must be taken into account, moreover can deal with anisotropic materials. However, for the scope of illustration, in the present case, it is applied to the simple case of “classical diffusion” (Fick’s model with constant boundary conditions) and concerns isotropic materials.     

Determining the mechanism controlling glass fibre strength loss during thermal recycling of waste composites

This paper presents an experimental investigation into the large reductions to the tensile fracture stress and the associated strength loss mechanism of E-glass fibres during thermal recycling. Fractographic analysis reveals the fracture process is controlled by surface flaws, irrespective of heat treatment temperature and duration. The fracture toughness is an important material property in order to understand possible changes in the strength–flaw relationship during heat treatment. Focussed ion beam (FIB) milling is used to artificially create a single nano-sized deep notch (between 30 and 1000 nm) in glass fibres. The strength loss, fracture toughness, fracture mirror constant and fracture mechanism observed for nano-notched and thermally recycled fibres are identical, indicating bulk property changes do not occur during thermal recycling. The study proves conclusively that surface flaw growth is the controlling mechanism reducing fibreglass strength during thermal recycling of waste polymer composites.     

Design of natural fiber composites utilizing interfacial crystallinity and affinity

Butanediol initiated poly(ε-caprolactone) (PCL) has recently been reported as a toughening agent for cationically curing cycloaliphatic epoxides providing plasticized thermosets with excellent properties (Lützen et al., 2013). In this contribution that promising toughening approach was applied for the first time for the development of novel natural fiber composites (NFC). NFCs based on conventional brittle thermosetting polymers often suffer from poor interfacial adhesion and stress cracking. Composites made up of the novel plasticized thermosets and woven flax fiber preserved the elastomer-like properties and increased tensile strength and elongation at break up to 60 MPa and 5%, respectively. Furthermore, PCL was shown not only to toughen the epoxide but also to modulate the affinity of the matrix to the fiber. In conclusion, improved interfacial adhesion and the resulting excellent mechanical properties of cationically curable NFCs were achieved by both interfacial crystallization and affinity.     

Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials

To determine the amount of deformation resulting from fibre wrinkling at corner regions, a set of experiments have been conducted. As known in the conventional lay-up method, the prepregs are laid sequentially layer by layer on the mould surface. At the corner region of a female tool the radius decreases at the inner surface and the amount of wrinkles increase towards the top layer as the layers are laid up. In order to determine how much these wrinkles influence the dimensional stability of the manufactured parts, an alternative lay-up method is used. The amount of the wrinkles can be increased for the parts of same geometry by first stacking prepregs on a flat plate and then bending the whole stack to conform to the surface of the L-shaped mould. In this method, more wrinkling occurs on the inner surface of the corner regions as compared to the conventional lay-up procedure. It was found that fibre wrinkling decreases the spring-in values. The mechanism behind that observation is discussed with the help of a heuristic Finite Element Analysis (FEA). The conformation of the stacked prepregs on the mould was simulated by using FEA.     

Scaling of fracture response in Over-height Compact Tension tests

An experimental investigation into in-plane scaled Over-height Compact Tension (OCT) [45/90/−45/0]_4s carbon/epoxy laminates was carried out to study the scaling of fracture response. The dimensions of the baseline specimens were scaled up and down by a factor of 2. Interrupted tests were carried out for specimens of each size in which the tests were stopped after certain load drops in order to study the failure mechanisms. X-ray Computed Tomography (CT) scanning was applied after the interrupted tests to examine the damage development and its effect on the fracture response. The test results showed that the scaling of the initial propagation of fracture follows Linear Elastic Fracture Mechanics (LEFM), but the development of the damage process zone differs with specimen sizes. The OCT specimens were found to be not large enough to generate a self-similar damage zone during propagation, and so no conclusions could be drawn regarding the R-curve effect.     

N2 plasma-assisted grafting of fluorinated chains onto partially cured epoxy resins

Two routes for the grafting of fluorinated molecules to an epoxy resin were studied. The first one deals with the grafting of the liquid-state resin whereas the second one is focused on the grafting onto the solid-state resin. These grafting reactions were shown to be similar as studied through FTIR and XPS spectroscopies. However, it appears that the grafting onto the solid-state resin is limited by the curing advancement. N₂ plasma-activation was used to solve this drawback and enhanced the grafting yield. This grafting improvement was mainly explained in terms of the surface wetting improvement and the attachment of nitrogen containing groups at the surface of the treated resin.     

Evaluation of surface properties of epoxy–nanodiamonds composites

Epoxy–matrix reinforced with nanodiamond (ND) particles, with ND content up to 5 wt%, were synthesized. Characterization of NDs by field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy was conducted, while composites were characterized through contact angle, nanoindentation, nanoscratch and scanning probe microscopy. The assessed properties evaluated were hardness, elastic modulus, contact angle, deformation mechanisms, creep deformation, coefficient of friction and adhesion, namely. Results showed that even small additions of ND lead to significant enhancement in the hardness and elastic modulus of epoxy matrix, while properties of composites present a switch in behavior after passing a concentration threshold; this threshold was identified and discussed.     

Automated coronal hole segmentation from Solar EUV Images using the watershed transform

Region of interest segmentation in solar images is the subject of frequent research in solar physics. This study outlines watershed by immersion segmentation to identify coronal hole areas in solar images acquired using the Extreme UV Imaging Telescope (EIT). Solutions presented here produce highly accurate segmentation results of coronal holes of irregular shape, and what is more, they do so for images representing varied solar activity, recorded in different years and months. In addition, the solutions presented here make all the methods used operate very quickly. These methods include: the preprocessing step before the watershed segmentation, the watershed segmentation itself, and also the postprocessing of solar images after the watershed segmentation. The mean duration of the entire segmentation process of solar images amounts to 342 ms for a single coronal hole, without the parallel implementation of the methods used. The experiments were carried out on a computer with an Intel Core i7 CPU @ 2 GHz and 4 GB RAM. After the seed point is identified inside the coronal hole, the segmentation runs automatically.     

Effect of the interfacial condition on the microtexture near the interface of Al/Cu composites during multi-pass caliber rolling

The local microtexture developments of Cu near the interface of Al-core/Cu-sheath composites during multi-pass caliber rolling are investigated using the finite element method in conjunction with a visco-plastic self-consistent model. Two models with different interfacial conditions between Al and Cu are used in order to investigate the effect of the interfacial condition. The resulting inverse pole figures and difference in ODFs for the different numbers of caliber rolling passes indicate that the Coulomb frictional contact condition between Al and Cu represents the final microtextures better than the fully bonded interfacial condition.     

The Importance of G Protein-Coupled Receptor Kinase 4 (GRK4) in Pathogenesis of Salt Sensitivity,Salt Sensitive Hypertension and Response to Antihypertensive Treatment

Salt sensitivity is probably caused by either a hereditary or acquired defect of salt excretion by the kidney, and it is reasonable to consider that this is the basis for differences in hypertension between black and white people. Dopamine acts in an autocrine/paracrine fashion to promote natriuresis in the proximal tubule and thick ascending loop of Henle. G-protein receptor kinases (or GRKs) are serine and threonine kinases that phosphorylate G protein-coupled receptors in response to agonist stimulation and uncouple the dopamine receptor from its G protein. This results in a desensitisation process that protects the cell from repeated agonist exposure. GRK4 activity is increased in spontaneously hypertensive rats, and infusion of GRK4 antisense oligonucleotides attenuates the increase in blood pressure (BP). This functional defect is replicated in the proximal tubule by expression of GRK4 variants namely p.Arg65Leu, p.Ala142Val and p.Val486Ala, in cell lines, with the p.Ala142Val showing the most activity. In humans, GRK4 polymorphisms were shown to be associated with essential hypertension in Australia, BP regulation in young adults, low renin hypertension in Japan and impaired stress-induced Na excretion in normotensive black men. In South Africa, GRK4 polymorphisms are more common in people of African descent, associated with impaired Na excretion in normotensive African people, and predict blood pressure response to Na restriction in African patients with mild to moderate essential hypertension. The therapeutic importance of the GRK4 single nucleotide polymorphisms (SNPs) was emphasised in the African American Study of Kidney Disease (AASK) where African-Americans with hypertensive nephrosclerosis were randomised to receive amlodipine, ramipril or metoprolol. Men with the p.Ala142Val genotype were less likely to respond to metoprolol, especially if they also had the p.Arg65Leu variant. Furthermore, in the analysis of response to treatment in two major hypertension studies, the 65Leu/142Val heterozygote predicted a significantly decreased response to atenolol treatment, and the 65Leu/142Val heterozygote and 486Val homozygote were associated in an additive fashion with adverse cardiovascular outcomes, independent of BP. In conclusion, there is considerable evidence that GRK4 variants are linked to impaired Na excretion, hypertension in animal models and humans, therapeutic response to dietary Na restriction and response to antihypertensive drugs. It may also underlie the difference in hypertension between different geographically derived population groups, and form a basis for pharmacogenomic approaches to treatment of hypertension.